Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.
Distance Extension with High Performance and Steady Network Communications
PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.
Enhanced Smart Management Features
The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.
Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.
The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX.
• TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X.
• 1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters.
• Layer 2 key Feature
–IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets
–Supports auto MDI/MDI-X function
–Non-blocking full wire-speed forwarding rate
• Media conversion between 10/100/1000Base-T and 1000Base-SX/LX.
• Fiber media allows:
–Multi-mode fiber using SC/LC/WDM connector;
–Single-mode fiber using SC/LC/WDM connector
• Compact size for working with PLANET MC family media chassis (MC-700 / MC-1500 / MC-1500R / MC-1500R48)
• Wall-mountable design
• LED indicators for easy network diagnostics
• Provides DIP switch for LFP function (Disable / Enable) setting
• OAM TS-1000 supported
• 9K Jumbo Frame Supported
• Choice of fiber-connector from SC, LC and WDM, multi-mode / single-mode fiber for 1000Base SFP interface
• Compact in size, easy installation
Hardware Version: 3
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX
IEEE 802.3ab, 1000Base-T
IEEE 802.3z, 1000Base-SX/LX
1 x 10/100/1000Base-T port,
1 x 1000Base-SX/LX port
Copper Interface: RJ-45 port (Auto-MDI/MDI-X) Twisted Pair
Optic Interface: SFP
10/20Mbps for half/full-duplex
100/200Mbps for half/full duplex
200Mbps for full-duplex
Fiber-optic: 2000Mbps for full-duplex
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100m
100Base-TX: 2-pair UTP Cat. 5, up to 100m
1000Base-T: 4-pair STP Cat 5 up to 100m
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
9/125μm single-mode cable, providing long distance for
10/15/20/30/40/50/60/70/120km (vary on fiber transceiver or SFP module)
‧TP LINK/ACT, 1000
DIP Switch: LFP function (Disable / Enable) setting
OAM: TS-1000 and IEEE 802.3ah Terminal mode supported
Jumbo Packet Size: 9K
Power Consumption: 4.6 watts / 15 BTU (maximum)
Power Input: DC 5V / 2A
Dimensions (W x D x H): 26 x 70 x 97 mm
Operating Environment: Operating temperature: 0 to 50 degrees C; Humidity: 5~95% non-condensing
Storage Environment: storage temperature: -10 to 70 degrees C; Humidity: 5~95% non-condensing
Emissions: FCC Class A, CE Class A